Aller au contenu

This article provides a brief introduction to the creation of molecular orbital diagrams in LaTeX using the modiagram package. Readers are strongly encouraged to consult the modiagram package documentation which contains numerous helpful examples to demonstrate its many features—far more than we can address in this short article.

For information about the more traditional molecular structure diagrams see our documentation about chemistry formulae.

Introduction

Molecular diagrams are created using the modiagram package which you import to your document by adding the following line to its preamble:

\usepackage{modiagram}[\(\langle\)options\(\rangle\)]

The set of \(\langle\)options\(\rangle\) are listed, and demonstrated, in the package documentation.

To apply package \(\langle\)options\(\rangle\) globally you can

  • set them when you load the package via \usepackage{modiagram}[\(\langle\)options\(\rangle\)], or
  • use the setup command \setmodiagram{\(\langle\)options\(\rangle\)}

MO diagrams are created using the modiagram environment, which supports local use of package \(\langle\)options\(\rangle\):

\begin{modiagram}[\(\langle\)options\(\rangle\)]
...

\end{modiagram}

The following example demonstrates a minimal modiagram environment without any using any \(\langle\)options\(\rangle\):

\documentclass{article}
\usepackage{modiagram}
\begin{document}

First example atoms:

\begin{modiagram}
\atom{left}{1s, 2s, 2p}
\end{modiagram}
\end{document}

 Open this example in Overleaf.

This example produces the following output:

Example of a molecular diagram produced in LaTeX

The basic command to draw MO diagrams is \atom which, as demonstrated in the example above, takes two arguments:

  • left: the alignment of the atom.
  • 1s, 2s, 2p: the energy sub-levels to be drawn. These can be further customized as you will learn in the next section.

Atoms

You can pass some extra information about the atomic orbitals to the command presented in the introductory example.

\documentclass{article}
\usepackage{modiagram}
\begin{document}

\begin{modiagram}
 \atom{right}{
    1s = { 0; pair} ,
    2s = { 1; pair} ,
    2p = {1.5; up, down }
 }

 \atom{left}{
    1s = { 0; pair} ,
    2s = { 1; pair} ,
    2p = {1.5; up, down }
 }
 \end{modiagram}
\end{document}

 Open this example in Overleaf.

This example produces the following output:

example of atomic orbitals

In this example, two identical atoms are drawn, left- and right-aligned respectively.

Following the style of the modiagram package documentation, the generic syntax to create atoms can be written as:

\atom[\(\langle\)name\(\rangle\)]{\(\langle\)left\(\rangle\)|\(\langle\)right\(\rangle\)}{\(\langle\)AO-spec\(\rangle\)}

where

  • \(\langle\)name\(\rangle\) is an optional name for the atom
  • \(\langle\)left\(\rangle\) and \(\langle\)right\(\rangle\) determine the placement in the diagram
  • \(\langle\)AO-spec\(\rangle\) is the specification of the Atomic Orbital.

The \(\langle\)AO-spec\(\rangle\) takes the general form

sub-level = {energy; specifications}

where

  • sub-level can be 1s, 2s or 2p
  • energy is the energy level, a number that determines the vertical spacing in the diagram. If omitted it is set to 0.
  • specifications is a comma-separated list of the spins of the electrons contained in each orbital. The possible values are up, down, pair and empty (only the semicolon is typed) for an empty orbital. If omitted it is set to pair.

Here is a description of the commands used in the previous example:

  • 1s = { 0; pair}. The sub-level 1s is in the 0 energy level, the orbital contains two (paired) electrons.
  • 2s = { 1; pair}. The sub-level 2s drawn in the 1 energy level, there are two electrons in this orbital.
  • 2p = {1.5; up, down}. The sub-level 2p drawn in the energy level 1.5, i.e. in the diagram the vertical spacing is set to 1.5; this sub-energy level has two electrons: one with spin up in the first orbital and another with spin down in the second orbital.

The same commands are repeated for the second atom on the right.

To display the (optional) name of an atom use a modiagram environment with the [names] option:

\documentclass{article}
\usepackage{modiagram}
\begin{document}
\begin{modiagram}[names]
 \atom[Atom on the right]{right}{
    1s = { 0; pair} ,
    2s = { 1; pair} ,
    2p = {1.5; up, down }
 }

 \atom[Atom on the left]{left}{
    1s = { 0; pair} ,
    2s = { 1; pair} ,
    2p = {1.5; up, down }
 }
\end{modiagram}
\end{document}

 Open this example in Overleaf.

This example produces the following output:

Example molecular orbital

Molecules

The syntax for molecules is very similar to that of the \atom and, in the style of the documentation, can be written as:

\molecule[\(\langle\)name\(\rangle\)]{\(\langle\)MO-spec\(\rangle\)}

where

  • \(\langle\)name\(\rangle\) is an optional caption of the molecule
  • \(\langle\)MO-spec\(\rangle\) is the specification of the Molecular Orbital

The energy sub-levels 1s, 2s and 2p become 1sMO, 2sMO and 2pMO respectively. Here is a basic example:

\documentclass{article}
\usepackage{modiagram}
\begin{document}
\begin{modiagram}
 \atom{left}{1s}
 \atom{right}{1s={;up}}
 \molecule{
    1sMO={0.75;pair,up}
  }
\end{modiagram}
\end{document}

 Open this example in Overleaf

This example produces the following output:

example of molecule diagram

In the example above, the molecular orbital specification (\(\langle\)MO-spec\(\rangle\) ) is

1sMO={0.75;pair,up}

where

  • 0.75 is now the ratio (energy gain)/(energy loss).
  • pair, up are the spins of the electrons in the bonding and anti-bonding molecular orbitals, respectively.

The next, slightly more elaborate, example should help you understand the syntax:

\documentclass{article}
\usepackage{modiagram}
\begin{document}
\begin{modiagram}
 \atom{left}{
      1s, 2s, 2p = {;pair,up,up}
  }
  \atom{right}{
      1s, 2s, 2p = {;pair,up,up}
  }
  \molecule{
      1sMO, 2sMO, 2pMO = {;pair,pair,pair,up,up}
  }
\end{modiagram}
\end{document}

 Open this example in Overleaf

This example produces the following output:

elaborated example of molecular orbital

Three atoms are set on each side of the diagram and the corresponding molecule is in the middle.

Naming scheme

The following diagram is reproduced from the modiagram package documentation. It contains the names (labels) used for the orbitals, which are nodes in a tikzpicture and thus can be used in standard TikZ drawing commands within a modiagram environment.

modiagram names for oribtals

Here is an example using the name of the anti-bonding orbital 1sigma* for relative positioning.

\documentclass{article}
\usepackage{modiagram}
\begin{document}
\begin{modiagram}
 \atom{left}{1s}
 \atom{right}{1s={;up}}
 \molecule{
    1sMO={;pair,up}
 }
 \draw[<-,shorten <=8pt,shorten >=15pt,blue]
 (1sigma*) --++(2,1) node {anti-bonding MO};
\end{modiagram}
\end{document}

 Open this example in Overleaf.

This example produces the following output:

example of orbital with anti-bonding

Further reading

For more information see:

Overleaf guides

LaTeX Basics

Mathematics

Figures and tables

References and Citations

Languages

Document structure

Formatting

Fonts

Presentations

Commands

Field specific

Class files

Advanced TeX/LaTeX