%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Masters/Doctoral Thesis
% LaTeX Template
% Version 2.5 (27/8/17)
%
% This template was downloaded from:
% http://www.LaTeXTemplates.com
%
% Version 2.x major modifications by:
% Vel (vel@latextemplates.com)
%
% This template is based on a template by:
% Steve Gunn (http://users.ecs.soton.ac.uk/srg/softwaretools/document/templates/)
% Sunil Patel (http://www.sunilpatel.co.uk/thesis-template/)
%
% Template license:
% CC BY-NC-SA 3.0 (http://creativecommons.org/licenses/by-nc-sa/3.0/)
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass[
11pt, % The default document font size, options: 10pt, 11pt, 12pt
oneside, % Two side (alternating margins) for binding by default, uncomment to switch to one side
english, % ngerman for German
onehalfspacing, % Single line spacing, options: singlespacing, onehalfspacing or doublespacing
%draft, % Uncomment to enable draft mode (no pictures, no links, overfull hboxes indicated)
nolistspacing, % If the document is onehalfspacing or doublespacing, uncomment this to set spacing in lists to single
%liststotoc, % Uncomment to add the list of figures/tables/etc to the table of contents
%toctotoc, % Uncomment to add the main table of contents to the table of contents
parskip, % Uncomment to add space between paragraphs
%nohyperref, % Uncomment to not load the hyperref package
headsepline, % Uncomment to get a line under the header
%chapterinoneline, % Uncomment to place the chapter title next to the number on one line
% consistentlayout, % Uncomment to change the layout of the declaration, abstract and acknowledgements pages to match the default layout
]{MastersDoctoralThesis} % The class file specifying the document structure
\usepackage[utf8]{inputenc} % Required for inputting international characters
\usepackage[T1]{fontenc} % Output font encoding for international characters
\usepackage[print-unity-mantissa=false, separate-uncertainty=true, separate-uncertainty-units=single, range-units=single]{siunitx}
\usepackage[autostyle=true]{csquotes} % Required to generate language-dependent quotes in the bibliography
\usepackage{mathpazo} % Use the Palatino font by default
% \usepackage{bookmark}
\usepackage[font=footnotesize]{caption}
\usepackage[backend=biber, style=ieee, eprint=false, citestyle=chem-angew, doi=true, maxbibnames=4]{biblatex}
% \DefineBibliographyStrings{english}{andothers = {\upshape et al\adddot}}
% \DefineBibliographyStrings{english}{phdthesis = {PhD thesis}}
% \AtEveryBibitem{\ifentrytype{article}{\clearfield{url}\clearfield{issn}\clearfield{urlyear}}{}}
% \AtEveryBibitem{\ifentrytype{book}{\clearfield{urlyear}}{}}
% \AtEveryBibitem{\ifentrytype{incollection}{\clearfield{url}\clearfield{urlyear}}{}}
% \AtEveryBibitem{\ifentrytype{inproceedings}{\clearfield{issn}\clearfield{isbn}
% \clearfield{url}\clearfield{urlyear}}{}}
% \AtEveryBibitem{\clearfield{day}}
% \AtEveryBibitem{\clearfield{pagetotal}}
\addbibresource{example.bib} % The filename of the bibliography
\sisetup{range-phrase=--}
% \setsecnumdepth{subsection}
% \settocdepth{subsection}
\usepackage{hyperref}
\hypersetup{
pdfpagemode={UseOutlines},
bookmarksopen=true,
bookmarksopenlevel=0,
hypertexnames=false,
colorlinks=false,% Set to false to disable coloring links
citecolor=magenta,% The color of citations
linkcolor=green,% The color of references to document elements (sections, figures, etc)
urlcolor=mdtRed,% The color of hyperlinks (URLs)
pdfstartview={FitV},
unicode,
breaklinks=true,
}
\usepackage[capitalize]{cleveref}
\crefname{subappendix}{section}{sections}
%----------------------------------------------------------------------------------------
% MARGIN SETTINGS
%----------------------------------------------------------------------------------------
\geometry{
paper=a4paper, % Change to letterpaper for US letter
inner=2.5cm, % Inner margin
outer=3.8cm, % Outer margin
bindingoffset=.5cm, % Binding offset
top=1.5cm, % Top margin
bottom=1.5cm, % Bottom margin
%showframe, % Uncomment to show how the type block is set on the page
}
%----------------------------------------------------------------------------------------
% THESIS INFORMATION
%----------------------------------------------------------------------------------------
\thesistitle{Thesis Title} % Your thesis title, this is used in the title and abstract, print it elsewhere with \ttitle
\supervisor{Dr. James \textsc{Smith}} % Your supervisor's name, this is used in the title page, print it elsewhere with \supname
\examiner{} % Your examiner's name, this is not currently used anywhere in the template, print it elsewhere with \examname
\degree{Philosophiae Doctor} % Your degree name, this is used in the title page and abstract, print it elsewhere with \degreename
\author{John \textsc{Smith}} % Your name, this is used in the title page and abstract, print it elsewhere with \authorname
\addresses{} % Your address, this is not currently used anywhere in the template, print it elsewhere with \addressname
\subject{Biological Sciences} % Your subject area, this is not currently used anywhere in the template, print it elsewhere with \subjectname
\keywords{} % Keywords for your thesis, this is not currently used anywhere in the template, print it elsewhere with \keywordnames
\university{\href{http://www.university.com}{University Name}} % Your university's name and URL, this is used in the title page and abstract, print it elsewhere with \univname
\department{\href{http://department.university.com}{Department or School Name}} % Your department's name and URL, this is used in the title page and abstract, print it elsewhere with \deptname
\group{\href{http://researchgroup.university.com}{Research Group Name}} % Your research group's name and URL, this is used in the title page, print it elsewhere with \groupname
\faculty{\href{http://faculty.university.com}{Faculty Name}} % Your faculty's name and URL, this is used in the title page and abstract, print it elsewhere with \facname
\AtBeginDocument{
\hypersetup{pdftitle=\ttitle} % Set the PDF's title to your title
\hypersetup{pdfauthor=\authorname} % Set the PDF's author to your name
\hypersetup{pdfkeywords=\keywordnames} % Set the PDF's keywords to your keywords
}
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\pagestyle{plain} % Default to the plain heading style until the thesis style is called for the body content
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\begin{titlepage}
\linespread{1.5}
\begin{center}
\vfill
{\Huge\textbf{\ttitle}\\}
\bigskip
{\large by\\}
\medskip
{\LARGE \textbf{\authorname}\\}
\bigskip
{\large Supervisor: \supname\\}
\bigskip
{\large Submitted in fulfillment of the requirements for the degree\\}
\medskip
{\LARGE \textit{\degreename (\groupname)}\\}
\bigskip
{\large in the \deptname\\
\href{http://www.up.ac.za}{University of Pretoria}\\}
\bigskip
\bigskip
{\large \today\\}
\bigskip
\bigskip
\bigskip
\bigskip
\vfill
\includegraphics[width=0.25\textwidth]{uplogo.jpg}
\end{center}
\end{titlepage}
%----------------------------------------------------------------------------------------
% ABSTRACT PAGE
%----------------------------------------------------------------------------------------
\begin{abstract}
\addchaptertocentry{\abstractname} % Add the abstract to the table of contents
\noindent The Thesis Abstract is written here (and usually kept to just this page).
The page is kept centered vertically so can expand into the blank space above the title too\ldots
\end{abstract}
%----------------------------------------------------------------------------------------
% DECLARATION PAGE
%----------------------------------------------------------------------------------------
\begin{declaration}
\addchaptertocentry{\authorshipname} % Add the declaration to the table of contents
\noindent I, \authorname, declare that the dissertation, which I hereby submit for the degree \textit{\degreename} at the University of Pretoria, is my own work and has not previously been submitted by me for a degree at this or any other tertiary institution.
\bigskip
\bigskip
\noindent Signed:\\
\rule[0.5em]{25em}{0.5pt} % This prints a line for the signature
\bigskip
\noindent Date:\\
\rule[0.5em]{25em}{0.5pt} % This prints a line to write the date
\end{declaration}
\cleardoublepage
%----------------------------------------------------------------------------------------
% QUOTATION PAGE
%----------------------------------------------------------------------------------------
\vspace*{0.2\textheight}
\noindent\enquote{\itshape Thanks to my solid academic training, today I can write hundreds of words on virtually any topic without possessing a shred of information, which is how I got a good job in journalism.}\bigbreak
\hfill Dave Barry
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
\begin{acknowledgements}
\addchaptertocentry{\acknowledgementname} % Add the acknowledgements to the table of contents
The acknowledgments and the people to thank go here, don't forget to include your project advisor\ldots
\end{acknowledgements}
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\tableofcontents % Prints the main table of contents
\listoffigures % Prints the list of figures
\listoftables % Prints the list of tables
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\begin{abbreviations}{ll} % Include a list of abbreviations (a table of two columns)
\textbf{LAH} & \textbf{L}ist \textbf{A}bbreviations \textbf{H}ere\\
\textbf{WSF} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or\\
\end{abbreviations}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
\begin{constants}{lr@{${}={}$}l} % The list of physical constants is a three column table
% The \SI{}{} command is provided by the siunitx package, see its documentation for instructions on how to use it
Speed of Light & $c_{0}$ & \SI{2.99792458e8}{\meter\per\second} (exact)\\
%Constant Name & $Symbol$ & $Constant Value$ with units\\
\end{constants}
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
\begin{symbols}{lll} % Include a list of Symbols (a three column table)
$a$ & distance & \si{\meter} \\
$P$ & power & \si{\watt} (\si{\joule\per\second}) \\
%Symbol & Name & Unit \\
\addlinespace % Gap to separate the Roman symbols from the Greek
$\omega$ & angular frequency & \si{\radian} \\
\end{symbols}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
\dedicatory{For/Dedicated to/To my\ldots}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{thesis} % Return the page headers back to the "thesis" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\include{Chapters/Chapter1}
% \include{Chapters/Chapter2}
% \include{Chapters/Chapter3}
% \include{Chapters/Chapter4}
% \include{Chapters/Chapter5}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\appendix % Cue to tell LaTeX that the following "chapters" are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\include{Appendices/AppendixA}
% \include{Appendices/AppendixB}
% \include{Appendices/AppendixC}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\printbibliography[heading=bibintoc]
%----------------------------------------------------------------------------------------
\end{document}
